Calibrate Printer
Overview
This function will print out a crosshair on a sheet of paper. By entering
the horizontal and vertical dimensions of this crosshair, Lotto Sorcerer can
compensate for the accuracy of your printer and/or print driver.
How to Invoke
Use the menu item "Utilities > Playslips > Calibrate Printer" .
Basic Procedure
- Click the "Print" button.
- Measure and submit the true horizontal and vertical dimensions of the
crosshairs.
- Click the "Test" button to verify.
- Click the "OK" button to finalize.
Window Controls
"Set Crosshair" Thickness
This lets you set how thick to print the crosshairs.
"Print" button
This prints uncalibrated crosshairs onto the paper.
"Test" button
This prints uncalibrated crosshairs onto the paper.
"Unit of Measure" dropdown
This lets you select the unit of measurement you want to use.
"Horizontal Dimension" dropdown
This dropdown lets you enter the distance from the left side of the paper to
the vertical line of the crosshairs.
"Vertical Dimension" dropdown
This dropdown lets you enter the distance from the top of the paper to the
horizontal line of the crosshairs.
"OK" button
Click to set the settings.
"Cancel" button
Click this to cancel the operation.
Note: You do not need to use a playslip for this calibration
procedure; you can use any paper that is compatible with your printer.